Ulytel 2 is a high quality headset telephone with intelligent
circuitry between the handset and the headset. It is
an ideal phone for contact / call centres or home workers
Main Features
20 non-volatile EPROM memories - once programmed
these memories are permanent. However, should you
need to reprogram any of the memories there is a switch
located underneath the phone.
Headset port which accepts the RP
Pro Headset or any other headset with a RJ9 connector
Intelligent auto sensing circuitry which means that
the phone recognizes when a headset is connected
On-hook dialing allows the user to make a call and
hear the calling party respond without removing the
receiver. Conversation between two parties can then
only take place once the receiver is lifted from the
cradle
Keypad programmable for loop disconnect, multi-frequency,
earth leg recall, message waiting etc
Durable 2.5mm virgin ABS plastic is used for the
handset base and 3mm for the receiver
Push to mute / push to speak button located on the
inner side of the receiver
Electronic latchable mute on the handset base
New call key - by depressing this key at the end
of a call a new line is provided spontaneously
Pause Key - only relevant in older loop disconnect
mechanical switches whereby a 4 second delay is added
so the switch could recognise the signal being sent
The keys on the keyboard are double shot moulded.
Produced like a "Blackpool Stick of Rock"
the keys should never wear out
Keys are concave in design and should not be adversely
affected by florescent glare
The keyboard PCB contacts are 3mm gold. Most handsets
today use less expensive carbon contacts
All Ulytel corded handsets have inductive coupling
and incoming volume for the hearing impaired.
Braille nipple key on the 5 key
Switchable tone key - LD / MF, recall and redial
keys
Two ultra-brite neon indicators provide for message
waiting and above the indicators an LED provides for
ultra-brite ring and indication. Both message waiting
and ring indication are bright and clear and designed
to be seen across an open plan office
Multi-option message waiting is keyboard programmable
Receiver has a security hook switch which secures
the hand piece when in the wall mounted position
All Ulytel handsets are provided with two modem
sockets
All Ulytel handsets have a built in wall bracket
Beneath the wall bracket is a compartment providing
dip switches for: Ringer - on/off; message waiting
- on/1/2 : tone/pulse: ELR/100/300: impedance - 600/800
On the right handside of the telephone is an digital
step up / step down ringer volume control
The rubber feet are of the highest quality. Adhesion
is improved and black marking on highly polished surfaces
should not occur
All Ulytel products conform to CE approvals and
corded handsets are built to a 40 year meantime between
failures
All corded handsets are provided with a 15 year
warranty